Chapter 3 - Installing The Device; Removing The Chassis Cover; Installing The Sata Drive - DFI RM641 User Manual

Chapter 3 - Installing the Device

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it have been powered-off.
2. Disconnect all power cords and cables.
3. Remove the 2 mounting screws to open the top cover.
Chassis
screw
4. The DIMM sockets are readily accessible after removing the chassis cover.
DIMM socket
Chapter 3 Installing the Device
Chapter 3

Installing the SATA Drive

1. Unfasten the 4 mounting screws that secure HDD bracket to the system.
Chassis
screw
2. Align the mounting holes of the SATA drive with the mounting holes on the HDD brackets and
then use the mounting screws to secure the drive in place.
Mounting screw
HDD bracket
11
Mounting screw
HDD bracket
SATA drive
www.dfi.com