Advertisement
Removing the Chassis Cover
Please observe the following guidelines and follow the procedure to open the
system.
1. Make sure the system and all other peripheral devices connected to it have been
powered-off.
2. Disconnect all power cords and cables.
3. The 2 mounting screws on the bottom of the system are used to secure the
cover to the chassis. Remove these screws and then put them in a safe place
for later use.
4. Lift the cover to open the system. The M.2 socket on the expansion board is
readily accessible after removing the bottom cover.
Chassis screw
2
M.2 socekt
Advertisement
