Console Display Status; Button Operations - LifeSpan SPRINTER XL User Manual

3.4 Console Display Status

1. STOP
In STOP status, the treadmill belt is not moving, both LED and back light are on.
a. If there is no operation over 10 minutes, it will turn to SLEEP status.
b. Press START button to start running
c. Turn off the safety key, it will turn to OFF status
2. RUNNING
In RUNNING status, the treadmill belt is moving, both LED and back light are on.
a. Press STOP button will stop running
b. Turn off the safety key, it will turn to OFF status
3. SLEEP
In SLEEP status, the treadmill belt stops moving. Both LED and back light are off.
a. If there is any button operation, it will turn to STOP or OFF status
b. If turn on the safety key, it will turn to STOP status
c. If turn off the safety key, it will turn to OFF status.
4. OFF
In OFF status, the treadmill belt stops moving. The LED shows "off" and back light is off.
a. If there is any button operation over 10 minutes, it will turn to SLEEP status
b. If turn on the safety key, it will turn to STOP status
c. There will be no respond when pressing any button.

3.5 Button Operations

Only when the safety key is on, can the user operate the computer that will beep for
every button pressing.
1.START
In STOP status, press START, it will display 3 seconds in TIME window and count down.
When it reached zero, it will turn to RUNNING status and will run at the default speed.
In RUNNING status, press START will not work.
During the 3 seconds counting down, you can press any button to cancel startup and
turn to STOP status.
LIFESPAN SPRINTER Page9