Belt/Deck/Roller Lubrication; How To Check The Running Mat For Proper Lubrication - LifeSpan SPRINTER XL User Manual

Table of Contents

Advertisement

TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages. This product is a
machine that contains moving parts which have been greased / lubricated and could leak.

4.3 Belt/Deck/Roller Lubrication:

The mat/deck friction may play a major role in the function and life of your treadmill and
that is why we recomm
life of your treadmill.
Lubrication is provided with this unit. You should apply the enclosed lubrication after
approximately the first 50 hours of op
according to the following timetable:
Light use (less that 3 hours per week) every 6 mo
Medium use (3-5 hours a week) every 3 months
H
eavy use (more than 5 hours per week) every 6-8 weeks.
See below procedures for lubricating:
1. Use a soft, dry cloth to wipe the area between the belt and deck.
2.
Spread lubricant onto the inside surface of belt
machine is turned off and power is disconnected).
3. Periodically lubricate the front and rear rollers to keep them at there peak performance
If the treadmill belt/deck/roller is kept reasonab
h
ours before additional re-lubing is necessary.
4.4
How to check the running mat
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage posit
3. Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is nee
If
the surface is dry to the touch, apply a suitable silicone lubricant.
end you constantly lubricate this friction point to prolong the useful
eration. We recommend lubrication of the deck
LIFESPAN SPRINTER
nths
and deck evenly (make sure the
ly clean it is possible to expect over 1200
for proper lubrication:
ion.
ded.
Page17
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents