Cabling Of The Beetle /M-Iii - Wincor Nixdorf BEETLE /M-III User Manual

Cabling Of the BEETLE /M-III

All devices belonging to the modular BEETLE / M-III that have a
separate power cable must be connected to the same electric circuit.
Remove the cable cover, if present.

Make sure that all data cables at the system unit and the peripherals

are plugged.
Plug one end of the AC cable into the socket of the BEETLE /M-III and

the other end to the wall socket.



12
Never connect data cables when the system is switched on.

Power Button at the front side
Power Connector
BEETLE /M-III User Manual