System Unit
Always make sure that the system is switched off when you do cabling
works.
Connecting peripherals with the system switched on is not allowed.
Example for a connector panel of the BEETLE /M-III:
⑩
BEETLE /M-III User Manual
3 x D- Sub (COM2*/COM3*/COM4*, power supplied)
Display 2 (DVI-D/PLINK2) w/o RMT
1 x D-Sub (COM1 interface)
Display 1 (DVI-D/PLINK2) with RMT
Mini-D-Sub jack (VGA)
Mini DIN (KYBD), keyboard
2 x USB- A (USB 2.0)| 2 x USB- A (USB 3.0)
RJ45 socket (LAN)
3 x jack plug, 3.5 mm (In, Out, microphone)
3 x PoweredUSB 12V
⑥ ⑦ ⑧ ⑨
⑩
19