Setting Up The Device; Horizontal Installation; Vertical Installation Of The Equipment - Wincor Nixdorf BEETLE /M-III User Manual

Setting Up the Device

Set up the BEETLE /M-III system where it will not be exposed to extreme
environmental conditions. Protect the device from vibrations, dust,
moisture, heat and strong magnetic fields.

Horizontal Installation

Mind the minimum distances indicated below! If the equipment is to be
fitted, you also must ensure that the specified minimum distances are
maintained and constant ventilation is provided. The immediate ambient
temperature of the system must not exceed 40 °C (104 °F).
Find four feet covered by a non-skid rubber foil at the rear side of the
BEETLE.

Vertical Installation Of the Equipment

Mind the following minimum clearances also for vertical mounting to
ensure sufficient ventilation:
Backward:
Forward:
You can position the device at the right or left side.
BEETLE /M-III User Manual
50 mm
60 mm
50 mm
60 mm
9