Advertisement
Quick Links
Advertisement
Related Manuals for Wincor Nixdorf BEETLE /?-II
Summary of Contents for Wincor Nixdorf BEETLE /?-II
- Page 1 BEETLE /M-II with Embedded Scale Controller and 2 Displays Technical Information...
- Page 2 Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability; technical modifications possible. Copyright © Wincor Nixdorf International GmbH, 2005 Published by Wincor Nixdorf International GmbH...
- Page 3 BEETLE/ M-II _____________________________________________________________________ Introduction The BEETLE /M-II is a newly developed POS system, equipped with an additional embedded scale controller to which a scale can be connected. This module processes all scale data from tare specification to zero setting. The embedded scale controller is internally connected to a multiplexer card VGA/4-MUX PCI so that the scale data can be displayed at the customer/cashier display BA69.
-
Page 4: Interior View
BEETLE/ M-II _____________________________________________________________________ Interior View Embedded Scale Controller HD/FD Emb. Scale Power Controller Supply _____________________________________________________________________... - Page 5 BEETLE/ M-II _____________________________________________________________________ VGA/4-MUX PCI-Controller Embedded Scale Controller VGA/4-MUX PCI-Controller _________________________________________________________________...
- Page 6 BEETLE/ M-II _____________________________________________________________________ Backside Calibration Seal/Calibra- tion Switch Scale Connection Connection for COM4 Connection COM4 to Scale Controller BA69 Display Connection BA69W-Display-Connection _____________________________________________________________________...
-
Page 7: Setting Up The Device
BEETLE/ M-II _____________________________________________________________________ Dimensions Width: 288mm Height: 155mm Depth: 286mm (without cable cover) 354mm (with optional cable cover) Setting up the Device Set up the BEETLE /M-II POS system so that it is not subject to any extreme environmental conditions. Protect the device from shocks, dust, moisture, heat and strong magnetic fields. - Page 8 BEETLE/ M-II _____________________________________________________________________ Vertical Installation The following minimum clearances must also be provided in vertical mounting into a confined furniture in free convection to ensure sufficient ventilation: upwards: 50 mm downwards: 50 mm A vertically installed device therefore has to be placed on a rig (spacer made of non-combustible material) that guarantees sufficient ventilation and a minimum clearance of 50 mm to the bottom of the furniture.
-
Page 9: Technical Specifications
BEETLE/ M-II _____________________________________________________________________ When installing the BEETLE M/-II, also make sure that the calibration seal and calibration switch on the rear side of the device are visible and readily accessible! If it is accessible from only one side, turn the device (for example 180 degrees vertically) so that the rear sides point outwards (to the access side). - Page 10 BEETLE/ M-II _____________________________________________________________________ Storage requirements EN 60721-3-1, class 1k2 Environmental test IEC 68 / EN60068 Air temperature: +5° C to +40° C Humidity: 5% r.h. (1g/m 3 ) – 85% r.h. (25 g/m 3 ) 0.5 K/min Temperature fluctuation: 0.5 K/min (max. 7.5K/30min) Transport requirements EN 60721-3-2, class 2k2 Environmental test IEC 68 / EN60068...
-
Page 11: Manufacturer Certification
BEETLE/ M-II _____________________________________________________________________ Manufacturer Certification This device fulfills the requirements of EU Regulations 89/336/EWG "Electromagnetic Compatibility" and 73/23/EWG "Low Voltage Guidelines". The device carries the CE logo on its rear side, or the logo is located on the packaging. _________________________________________________________________... - Page 13 Wincor Nixdorf International GmbH, 2004 D-33094 Paderborn Order No.: 01750075228C...
Need help?
Do you have a question about the BEETLE /?-II and is the answer not in the manual?
Questions and answers