Cabling Of The Beetle /L - Wincor Nixdorf BEETLE /L User Manual

BEETLE /L - the individual POS system
Mount the device in such a way that the ventilator faces
upwards.
The following minimum clearances must be provided in free
convection to ensure sufficient ventilation:

Cabling of the BEETLE /L

Follow the steps below in the order given when installing devices:
Make sure that the power switch on the front of the housing
is set to OFF, i.e. that it visibly protrudes. You may have to
open the slide in order to do this (see figure on Page GB -
16).
The cable cover must be removed, if present.
Plug one end of the power cable into the power cord
receptacle on the BEETLE /L.
Plug the other end of the power cable into a socket.
Plug in and secure the data cable.
downwards left: 60 mm
upwards right: 100 mm
Cabling of the BEETLE
Cabling of the BEETLE
GB - 13