Cabling Of The Beetle; Securing The Data Cable - Wincor Nixdorf Beetle/60 User Manual

Cabling of the BEETLE

Cabling of the BEETLE
Follow the steps below in the order given when installing devices:
Make sure that the power switch on the back of the housing is set to
"0".
Plug in and secure the data cable.
Plug the power cable into the rubber connector of the BEETLE.
Plug the power cable into the grounded-contact utility power socket.

Securing the data cable

GB - 12
Cabling of the BEETLE
POS terminal and system
Secure interface
connectors with
knurled screws using
your fingers.
Secure interface
connectors with
standard screws
using a screwdriver.
Mini-DIN connectors
are locked when
inserted.