Before Switching On The System; Unpacking And Checking The System; Setting Up The Device; Cabling Of The Beetle /Xs - Wincor Nixdorf BEETLE /XS User Manual

Before switching on the System

Unpacking and checking the System

Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
The carton contains the basic unit and a country-specific accessories kit.
Some ordered composition may be installed.
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly inform your Wincor Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against
impact and shock).

Setting up the device

Set up the BEETLE /XS POS system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations, dust,
moisture, heat and strong magnetic fields.

Cabling of the BEETLE /XS

Follow the steps below in the order given when installing devices:
The cable cover must be removed, if present.
n
Plug one end of the power cable into the socket of the BEETLE /XS and
n
connect the other end to the main power supply.
Plug in and secure the data cable.
n
Always make sure that the system is switched off when you do cabling
works.
BEFORE SWITCHING ON THE SYSTEM
11