Table of Contents
Advertisement
Before switching on the System
Unpacking and checking the System
Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
The carton contains the basic unit and a country-specific accessories kit.
Some ordered composition may be installed.
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly inform your Wincor Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against
impact and shock).
Setting up the device
Set up the BEETLE NetPOS POS system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations, dust,
moisture, heat and strong magnetic fields.
Make sure that the side ventilation slots on the BEETLE NetPOS and the
external power supply are not obstructed in order to ensure that the device
has sufficient ventilation.
Cabling of the BEETLE NetPOS
Follow the steps below in the order given when installing devices:
The cable cover must be removed, if present.
n
Plug one end of the power cable into the external power supply and
n
connect the other end to the main power supply.
Plug one end of the other power cable into a grounded-contact power
n
socket of the external power supply and the other into the socket of the
BEETLE NetPOS.
n
Plug in and secure the data cable.
BEFORE SWITCHING ON THE SYSTEM
11
Advertisement
Table of Contents
