Changing Ram Module - Wincor Nixdorf BEETLE /M-III User Manual

Changing RAM Module

Shut down the system. Unplug the power cord.
Use an ESD equipment.
Remove the housing cover (see chapter "Opening BEETLE /M-III").
Loosen the two screws at the back side.
Disconnect the cables overlaying the air duct at the right side of the moth-
erboard. Pull up the air duct (1) until you access to the RAM socket on the
motherboard.
Open the latch on both sides of the RAM socket outward (2).
The RAM module folded out of the base and can be removed.
BEETLE /M-III User Manual
You must always assemble the lower memory socket with the
RAM module.
②
①
②
37