Com5 (*) -Com6 (*) - Interfaces (Optional) - Wincor Nixdorf BEETLE /M-III User Manual

(*)
COM5 -COM6
The standard system is configured with four COM* interfaces, COM1 con-
nector (not power supplied) and COM2*-COM4* sockets (power supplied).
In addition expansions are possible via a motherboard connector.
The power supplied COM5*/COM6* (onboard) interfaces or the not power
supplied COM5/COM6 interfaces are available optionally.
Scanners, customer and operator displays without power supply of their
own are connected to these serial interfaces. The interface connection is a
9-pin D-sub jack. Power (5V or 12V) is supplied via this jack.
Make sure that the connector for the customer display is screwed firmly to
the socket to prevent possible malfunctioning.
36
(*)
- Interfaces (optional)
BEETLE /M-III User Manual