Setting The Time For A Delayed Ringer - Siemens OpenScape Voice Operating Manual

Step by Step
User
Configuration
Keyset
Lines
Primary Line 1
Ring delay
Save & exit

Setting the time for a delayed ringer

Specify the length of time before a held call should be
signaled on a line.
z You can also configure this setting via the Web interface
page 187.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select the required line (e.g. primary line).
Select and confirm the option shown.
j
Enter and confirm a value (between 0 and 3600 sec-
onds).
Select and confirm the option shown.
You can activate and deactivate the set delay time for all
line keys using a function key
Making calls with multiple lines
page 71.
105