Call Pickup - Siemens OpenScape Voice Operating Manual

Making calls with multiple lines
Step by Step
^ n
or
Reject
102

Call pickup

You can pick up calls for another DSS station. The LED
flashes if a call incoming for this station's line.
Indirect pickup
Prerequisite: The auto-answer function must be deac-
tivated
T
Press the DSS key. The call is routed to your primary line
and rings.
o
or
Lift the handset or press the speakerphone mode or
headset key. You are connected with the other party.
Rejecting a call
Prerequisite: Your administrator enabled the Reject op-
tion for DSS keys and deactivated Auto-answer
page 85.
T
Press the DSS key. The call is routed to your primary line
and rings.
Select and confirm the option shown in the pop-up
menu.
The caller hears a busy signal.
Direct pickup
Prerequisite: The auto-answer function must be acti-
vated
T
Press the DSS key. The call is routed to your primary line
and you are immediately connected with the other par-
ty via speakerphone.
page 85.
page 85.