Marking The Last Line In The Hunt Group Chain - Siemens OpenScape Voice Operating Manual

OpenScape Voicefunctions
Step by Step
142

Marking the last line in the hunt group chain

Sets the "stop hunt" line in the hunt group chain. The
system will stop looking for a free line in the hunt group
chain after it reaches this line.
Activating
^
Lift the handset.
j
Enter the code (see the table of codes
Z
Wait until you hear the confirmation tone.
Deactivating
Unmark the line as the end of the hunt group chain.
^
Lift the handset.
j
Enter the code (see the table of codes
Z
Wait until you hear the confirmation tone.
page 143).
page 143).