Switching To Speakerphone Mode - Siemens OpenScape Voice Operating Manual

Step by Step
n

Switching to speakerphone mode

Make note of the two different processes and ac-
tivate, if necessary, your preferred setting
Prerequisite: You are conducting a call via the handset
and the microphone and loudspeaker functions have
been activated by administrator.
Standard mode
]
and
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
US mode
If the country setting is set to US, you do not have to
hold down the loudspeaker key when replacing the
handset to switch to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
{ }
or
A secure voice communication is indicated by a
closed padlock icon on the graphic display; a non-
secure voice communication is indicated by an
open padlock icon on the graphic display (see
also
page 160.
page 46).
Basic functions
49