Openscape Voicefunctions; Feature Toggle Key - Siemens OpenScape Voice Operating Manual

OpenScape Voicefunctions

Step by Step
130
OpenScape Voicefunctions
The OpenScape Voice supports a number of functions
that you can activate and deactivate from your phone.
The OpenScape Voice functions are only avail-
able if the "Server features" function was activat-
ed on the phone by the administrator.
On multi-line telephones, the full scope of
OpenScape Voice functions is only available for
the primary line.

Feature toggle key

You can pick a programmable sensor key and program it
as a feature toggle key for activating the "make line
busy" and "stop hunt" functions.
You can then use the programmable sensor key to acti-
vate or deactivate the relevant OpenScape Voice func-
tion on the server for this phone.
You can only program first-level programmable sensor
keys because those linked to LEDs are used to display
function status as either on (LED on) or off (LED off). The
LED indicates the status of the function on the server
and can therefore change without any of the programma-
ble sensor keys being pressed.
If one of the programmable sensor keys is pressed, you
can see the status of the function on the graphic dis-
play.
Example:
Switching between "Line busy" and "Line free" (see also
page 141).
Prerequisite: Your administrator configured a program-
mable sensor key with the function "Busy" ("make line
busy" for the hunt group)
S
Press the programmable sensor key.
"Line busy" appears on the graphic display, for instance,
and the key lights up.
R
Press the lit programmable sensor key once again to re-
lease the line.
"Line free" appears on the graphic display.
page 70.