Call Forwarding Unconditional - Siemens OpenScape Voice Operating Manual

Step by Step

Call forwarding unconditional

With Call forwarding unconditional (CFV), all incom-
ing calls are forwarded to a different destination.
You can use the feature code to activate/deactivate this
function and define a forwarding destination.
Activating
^
Lift the handset.
j
Enter the code (see the table of codes
the number of the phone where you want to forward
the calls. After the confirmation tone, the
lights up and the forwarding instruction will be indicated
on the display.
If the "Courtesy call" function is active, the
OpenScape Voice dials the phone to which you forward-
ed your calls.
• If the party at this phone answers, you can inform
him or her that your calls are being forwarded to his
or her phone. The
forwarding instruction will be indicated on the dis-
play.
• If the party does not answer or the station is busy,
activate the feature once again. If you complete this
operation within two minutes, you will hear the con-
firmation tone followed by the dial tone. The
OpenScape Voice does not output an acoustic sig-
nal to inform the other party at the forwarding desti-
nation about the second activation.
If Call forwarding unconditional is active, calls for-
warded when the line is idle are signaled by a short ring
burst (around 0.5 seconds) at the forwarded station.
This is a reminder that this feature is active.
Deactivating
^
Lift the handset.
j
Enter the code (see the table of codes
You receive a confirmation tone.
OpenScape Voicefunctions
page 143) and
r
key now lights up and the
r
key
page 143).
133