Connecting Parties - Siemens OpenScape Voice Operating Manual

Step by Step
Complete Xfer
]
User
Configuration
Connected calls
Allow call joining
Yes
Save & exit

Connecting parties

You can join the first party with the party you consulted,
clearing down your connection to both parties in the
process.
Prerequisite: You are conducting a consultation call
page 55 and call joining must be allowed
Select and confirm the option shown in the active con-
nection's context menu.
The other two parties are now connected to one anoth-
er. You can now hang up.
or Connect by hanging up
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call joining
z You can also configure this setting via the Web interface
page 187.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
Basic functions
page 57.
57