Accepting A Call Via The Headset; Press The Key Shown; Switching To Speakerphone Mode - Siemens OpenStage 40 User Manual

Step by Step
+
if nec.
+
if nec.
+
if nec.

Accepting a call via the headset

Prerequisite: A headset is connected.
Make sure your headset port is set up properly.
The phone rings. The
o

Press the key shown.

-
or
Set the call volume.

Switching to speakerphone mode

People present in the room can participate in your call.
Prerequisite: You are conducting a call via the handset.
n ]
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
-
or
Set the call volume.
U.S. mode
If your communication system is set to U.S. mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
-
or
Set the call volume.
Basic functions
o
key flashes.
33