Ending A Call; Switching To Speakerphone Mode - Siemens optiPoint 410 User Manual

Operating the Telephone with the Display
Step by Step
Loudspeaker
Cancel/Rel.
>
Disconnect?
Loudspeaker
Loudspeaker
24
• The ideal distance between the user and the tele-
phone set in speakerphone mode is about 50 cm
(approx. 20 inches).
• If the other party cannot hear you, please check with
your service personnel whether your microphone
was deactivated via the configuration settings.
On multiline telephones, the line being signalled is
automatically selected when you lift the handset.
If more than one line is alerting, you are connected
to the line that has been ringing the longest.
If you want to override the automatic selection,
press the applicable line key before you go off-
hook.

Ending a Call

Press key. LED goes out.
or
Press Cancel/Rel.
or
:
Select and confirm.
>
If the call has been terminated by the other party,
the message "Cleared" appears in the display.

Switching to Speakerphone Mode

You can't use this function with optiPoint 410/
420 economy/economy plus
Prerequisite: You are conducting a call with the hand-
set.
t
and Hold down the key while replacing the handset. Then
release the key.
Proceed with the call.
Country Options set to US
In case you have set the country options to US, you do
not have to hold the loudspeaker key to switch to speak-
erphone mode while replacing te handset.
Press key.
t
Replace the handset and proceed with the call in speak-
erphone mode.