Step by Step
Speaker
n
Speaker
Speaker
Your HiPath 1220 may also be programmed so
that you have to press the Internal key before you
dial an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party's telephone
number (automatic trunk seizure/prime line is not
active; consult service personnel).
Switching to Speakerphone Mode
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
Precondition: You are conducting a call with the hand-
set.
t
and
Hold down the key and replace the handset. Then re-
lease the key and continue the call.
Switching to the Handset
This function is not available with
optiPoint 500 economy and optiPoint 500 basic.
Precondition: You are engaged in a call in speaker-
phone mode.
s
and
Lift the handset. Continue the call.
Open Listening
You can let other people in the room join in on the call.
Let the other party know that you have turned on the
speaker.
Precondition: You are conducting a call with the hand-
set.
Activating this function:
Press the key. The LED lights up.
Deactivating this function:
Press the key. The LED goes out.
Making Calls – Basic Functions
17