Switching To Speakerphone Mode; Switching To The Handset; Using Call Waiting; Accepting A Waiting Call (Camp-On) - Siemens HiPath 500 Operating Instructions Manual

Hide thumbs Also See for HiPath 500:
Table of Contents

Advertisement

Making and Answering Calls
Step by Step
Speaker
22

Switching to Speakerphone Mode

Precondition: You are conducting a call with the hand-
set.
t
and
Hold down the key and replace the handset.
Then release the key Continue the call.

Switching to the Handset

Precondition: You are engaged in a call in speaker-
phone mode.
n
s
and
Lift the handset. Continue the call.

Using Call Waiting

Callers can still reach you while you are engaged in an-
other call. A signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end
the first call or place it on hold and resume the call later
on.
You can also bar call waiting or the call waiting tone
page 23.

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
t
Replace the handset. Your telephone rings.
n
Answer the second call. Lift the handset.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hipath 5000Hipath 3000Optipoint 600 office

Table of Contents