Nomadix HotSpot Gateway HSG User Manual page 81

H S G ™
OT POT ATEWAY
Nomadix' patented Dynamic Address Translation (DAT) functionality is
automatically configured to facilitate "plug-and-play" access to
subscribers who are misconfigured with static (permanent) IP
addresses, or subscribers that do not have DHCP capability on their
computers. DAT allows all users to obtain network access, regardless of
their computer's network settings.
2. DHCP Services
all your DHCP services.
By default, the HSG is configured to act as its own DHCP server and the
relay feature is "disabled." If you want the HSG to act as its own DHCP
server, do not enable the relay. Go directly to Step 8.
To route DHCP through an external server, enable the
3.
If you enabled the DHCP Relay feature, you must assign a valid
4.
address (the default is 0.0.0.0) and a valid
The DHCP Relay Agent allows the HSG to request a specific range of IP
addresses from different IP pools from the DHCP Server. Leaving these fields
blank forces the system to use the IP pool that contains IP addresses that are on
the same subnet as the HSG.
You must disable the DHCP server before enabling the DHCP relay.
Both features cannot be enabled concurrently.
If the DHCP Relay Agent IP address is set for an address that is already
used or the IP address of the server, the other system will get an IP
conflict and will not have Internet access.
If you want the HSG to act as its own
5.
DHCP Relay), enable it now.
If required, you can make the DHCP Server feature
6.
the appropriate box.
If required, enable the
7.
System Administration
is enabled by default. Do not disable it unless you want to lose
DHCP Server
feature.
IP Upsell
DHCP Relay
DHCP Server IP
address.
DHCP Relay Agent IP
(you did not enable the
Subnet -based
.
by checking
77