Table of Contents
Advertisement
Click on the
4.
Submit
you want to reset all the values to their previous state.
Adding an Upstream RADIUS NAS
If you want to add a new Upstream RADIUS NAS (for example, an 802.11
5.
Access Point on the subscriber side of the HSG)., click on the
The Add Upstream RADIUS NAS screen appears:
To make this entry the "active" NAS entry, click on the
6.
Enter an
7.
IP Address
Enter a secret key in the
8.
authentication process, the server and client exchange secret keys. The secret
keys must match for communication between the server and the client to
continue. The secret key is a valuable and necessary security measure.
Enter a secret key in the
9.
Select the
10.
Default RADIUS Service Profile
RADIUS requests originating from this Upstream NAS will be routed via
the specified profile if it cannot be routed based on realm. Leave this
field blank if default routing is not desired.
102
button to save your changes, or click on the
for the Upstream NAS.
Authentication Secret Key
Accounting Secret Key
from the pull-down menu (see note).
H
S
G
OT
POT
ATEWAY
button if
Reset
button.
Add
check box.
Entry Active
field. During the
field.
System Administration
™
Advertisement
Table of Contents
