In Room Port Mapping - Nomadix HotSpot Gateway HSG User Manual

From the Cascading Support screen, you can return to the main Port-Location
Settings screen at any time by pressing the
Click on the
7. Submit
you want to reset all the values to their previous state.

In Room Port Mapping

This section shows In Room Port Mapping from the subscriber side, when the In
Room Port Mapping feature is enabled.
HSG multiple VLAN tagged systems can use the same tags and be
placed on different Subscriber ports. Although it is technically possible
to place two different VLAN tagged switches (one on each Subscriber
side) that have the same VLAN tags designated, this configuration can
cause problems. To avoid conflicts, you must ensure that the VLAN tags
are different on the different devices.
Enable
1. In Room Port Mapping
previous section, Steps 2 and 3).
Enter the following URL target format:
2.
http://(HSG IP address):1111/usg/roommapping
For example:
http://219.57.108.103:1111/usg/roommapping
The Enter Network Password prompt appears:
Click here if you want to save
your user name and password
96
Back
button to save your changes, or click on the
and assign a user name and password (see
H S G
OT POT ATEWAY
button.
button if
Reset
Enter user name and
password
System Administration
™