Enabling Aaa Services With An External Web Server - Nomadix HotSpot Gateway HSG User Manual

Access gateway
Table of Contents

Advertisement

Enable or disable
12.
must support this feature).
You can assign a session idle timeout parameter for subscribers (see following
13.
note). To assign an idle timeout, simply enter a numeric value (in seconds) in the
Subscriber Idle Timeout
Subscriber Idle Timeout does not apply to RADIUS and Post Pay PMS
subscribers.
If you enabled or disabled SSL Support on this screen, you must click the check
14.
box for
Reboot after changes are saved?
time the SSL Support feature is enabled or disabled).
Click on the
15.
Submit
you want to reset all the values to their previous state.

Enabling AAA Services with an External Web Server

You are here because you want to enable the AAA Services with an External Web
Server (EWS). In the EWS mode, the HSG redirects the subscriber's login request to
an external server.
Select the
1.
External Web Server
After enabling the External Web Server you must enter a Secret Key. The Secret
Key ensures that the response the HSG gets from the EWS is valid.
Enter the
2.
Secret Key
the same secret key).
DNS must be configured if you want to enter meaningful URLs instead
of numeric IP addresses into any of the HSG's configuration screens
(for example, the External login page URL in the following step).
Enter the
3.
IP Address
Enter a valid
4.
External login page URL
You can assign a session idle timeout parameter for subscribers (see following
5.
note). To assign an idle timeout, simply enter a numeric value (in seconds) in the
Subscriber Idle Timeout
Subscriber Idle Timeout does not apply to RADIUS and Post Pay PMS
subscribers.
Click on the
6.
Submit
you want to reset all the values to their previous state (making changes to the
EWS settings does not require a system reboot).
66
, as required (if enabled, your license key
Smart Client Support
box (the default is 1200).
button to save your changes, or click on the
.
(The HSG and the external authorization server must use
for the External Web Server.
.
box (the default is 1200).
button to save your changes, or click on the
H
S
OT
POT
(the HSG must be rebooted every
Reset
Reset
System Administration
G
ATEWAY
button if
button if

Advertisement

Table of Contents
loading

Table of Contents