Table of Contents
Advertisement
H
S
G
™
OT
POT
ATEWAY
Repeat Steps 2 through 11 for each billing plan. You can enable (make active)
10.
any or all of the available billing plans.
Define the messages you want to present to subscribers, including:
11.
Introduction Message
Offer Message
Policy Message
Define the
12.
Units of Access
make available to subscribers.
If you want to allow free access to subscribers, you can define the following free
13.
billing options:
Default Free Access Time
Maximum Subscriber Lifetime
Define any Promotional Code Options in the
14.
fields, as required. You can define up to 5 Promotional Code Options.
Discount
The "Percentage Discount" parameter must be between 1 and 99.
Click on the
15.
Submit
you want to reset all the values to their previous state.
Setting Up an X over Y Billing Plan
If required, click on the
1.
plan.
Define a "label" for this billing plan in the
2.
Each plan must have a unique label, different from other plans.
Enter a description for this billing plan in the
3.
Enter the cost the plan in the
4.
Enter a duration value for this plan in the
5.
Define the "time unit" for the duraction value you entered in Step 5. The time
6.
unit can be defined as either
Enter plan validity value for this plan in the
7.
System Administration
(Minute, Hour, Day, Week, or Month) you want to
(in days)
(in days)
button to save your changes, or click on the
check box to enable (make active) this billing
Enable
Label
field.
Plan Cost
Plan Duration (X)
,
, or
Minute
Hour
Plan Validity
and
Code Definition
Percentage
Reset
field.
Description of Service
field.
.
Day
(Y) field.
button if
field.
155
Advertisement
Table of Contents
