Nomadix HotSpot Gateway HSG User Manual page 123

H S G ™
OT POT ATEWAY
From the Web Management Interface, click on
1.
The IPSEC Tunnel Settings screen appears:
To enable this feature, click on the
2.
If you enabled IPSec, enter the
3.
To enable the
4. Perfect Forward Secrecy
check box.
For the "remote" end of the tunnel, enter the peer IP address in the
5.
Enter the IP address of the
6.
Enter the
7. Subnet Mask
Enter an IP address for the "local" end of the tunnel in the
8.
Enter the
9. Subnet Mask
If you made any changes to this screen, click on the check box for
10.
changes are saved?
Click on the
11. Submit
reset all values to their previous state.
System Administration
Enable IPSEC
in the corresponding field.
Shared Key
configuration, click on the appropriate
Remote IP/Subnet
for the remote end.
for the local end.
button to save your changes, or click on the Reset button to
, then
Configuration VPN Tunnel.
check box.
Peer IP
.
Local IP/Subnet
Reboot after
field.
field.
119