Table of Contents
Advertisement
Enter the
3.
Internal Port
Enter a valid
4.
MAC Address
Enter the
5.
External IP Address
The External IP address field will default to the IP address of the HSG.
Enter the
6.
External Port
Optional: Enter the
7.
to connect to the internal device from any network-side workstation.
Optional: Enter the
8.
want to connect to the device from any TCP/UDP port of a network-side
workstation.
Select the protocol (
9.
Click on the
10.
Add
reset all values to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on
page
125.
"Deleting Static Ports {Static Port-Mapping Delete}" on page
198
reference.
.
.
reference.
. Leave this field set to zero if you want
Remote IP Address
reference. Leave this field set to zero if you
Remote Port
or
) from the pull-down menu.
TCP
UDP
button to add this static port, or click on the
H
S
G
™
OT
POT
ATEWAY
button to
Reset
199.
System Administration
Advertisement
Table of Contents
