Table of Contents
Advertisement
H
S
G
™
OT
POT
ATEWAY
If you are using an access concentration device that cannot handle VLAN IDs,
6.
select one of the available Access Concentrator Query options:
The devices in the following list must be assigned an IP address on the
same subnet as the HSG. You must remove "old" concentrator types
before entering new ones.
Tut Systems Expresso
Lucent DSL Terminator
Tut MDU Lite Systems
RFC1493 Compliant Systems
RiverDelta 1000B
Elastic Networks
These options enable an SNMP query to "ask" the access concentration device
which card, slot, or port the information is coming from. The information can
then be "sent to" and "billed by" the PMS. You must enter the IP address (not
name) and SNMP community of all access concentrators connected to the site.
For "cascading" Tut and RFC1493 compliant systems, click on the associated
button. The Cascading Support screen appears, allowing you to enter
Cascading
the IP address and SNMP community for the primary and all "cascading" devices
connected to the site. For RFC1493 compliant systems, you have the additional
option of defining the "Uplink port."
System Administration
Tut Systems
RFC1493 Systems
95
Advertisement
Table of Contents
