Assigning Login User Names And Passwords - Nomadix HotSpot Gateway HSG User Manual

H S G ™
OT POT ATEWAY

Assigning Login User Names and Passwords

When you initially powered up the HSG and logged in to the Management Interface,
the default login user name and password you used was "admin." The HSG allows
you to define 2 concurrent access levels to differentiate between managers and
operators, where managers are permitted read/write access and operators are
restricted to read access only. Once the logins have been assigned, managers have the
ability to perform all write commands (Submit, Reset, Reboot, Add, Delete, etc.), but
operators cannot change any system settings. When Administration Concurrency is
enabled, one manager and three operators can access the HSG at any one time (the
default setting for this feature is "disabled").
Enter (system) at the HSG Menu.
1. sy
The System menu appears.
Enter (login).
2. lo
The system prompts you for the current login. If this is the first time you are
changing the login parameters since initializing the HSG, the default login name
and password is "admin."
The system accepts up to 11 characters (any character type) for user
names and passwords. All user names and passwords are case-sensitive.
When prompted, confirm the current login parameters and enter new ones.
3.
S S
AMPLE CREEN
System>lo
Enable/Disable Administration Concurrency [disabled
Current login: admin
Current password: *****
Enter new manager login: newmgr
Enter new password: *******
Retype new password: *******
The administrative login and password were changed
Enter new operator login: newop
Enter new operator password: *****
Retype new operator password: *****
The operator login and password were changed
You must use the new login user name(s) and password(s) to access the system.
Installing the HSG
R
ESPONSE
]: e
45