Table of Contents
Advertisement
Choose
2.
Subscriber
Define the DHCP Address Type:
3.
Upsell feature is enabled, otherwise leave this set to "private").
Leave the
4.
802.1Q Device Port
Enter a valid
5.
MAC Address
If you have chosen to manage this subscriber by user name only, you do not need
to enter a MAC address (but you must enter a user name).
Enter the
6.
IP Address
Enter a valid
7.
Subnet
In the
8.
Username
MAC address and you do not want to assign a user name, skip Step 9 (password).
User names and passwords are case-sensitive. Having a user name and
password is an optional service that subscribers may request (for
example, if they are using more than one machine, or moving between
locations and they want an additional level of security). If they request
this service, they are prompted at the login screen for the user name and
password you assign here. Solution providers can charge a fee for this
service, at their discretion.
If you assigned a user name, you must now assign a
9.
In the
10.
Expiration Time
subscriber's authorized access time. When the assigned time expires, the
subscriber must "re-subscribe" to the service.
Enable or disable the
11.
Enter an amount in the
12.
The next two fields (
13.
these fields for simple notations about the subscriber.
Define the
14.
Upstream Bandwidth
subscriber (in Kbps).
Click on the
15.
Add
button if you want to reset all the values to their previous state.
Reset
140
or
for this profile.
Device
or
Public
field blank.
for the subscriber.
of the subscriber.
address for this subscriber.
field, enter a user name for this subscriber. If you entered a
field, define the duration (in hours and minutes) for the
Count-down after Login
field.
Paid
and
User Definable 1
and
Downstream Bandwidth
button to add this subscriber to the database, or click on the
H
S
OT
POT
(only used when the IP
Private
.
Password
feature, as required.
) are optional. Use
User Definable 2
range for this
System Administration
G
™
ATEWAY
Advertisement
Table of Contents
