Table of Contents
Advertisement
Enable or disable
5.
you must enable the XML interface and enter the IP address for the XML
interface (Step 3 and Step 4).
Enable or disable the
6.
System administrators can set the HSG to pass-through HTTPS traffic, in
addition to standard port 80 traffic, without being redirected. When access to a
non-HTTPS address (for example, a Search Engine or News site) has been
requested, the subscriber is then redirected as usual.
If AAA passthrough is enabled, enter the corresponding port number.
7.
The port number must be different than 80, 2111, 1111, or 1112.
Enable or disable the
8.
Both AAA and RADIUS Authentication must be enabled for 802.1x
Authentication support.
Enable or disable the
9.
feature, as required.
and EWS
Select the authorization mode you want to use:
10.
Internal Web Server
External Web Server
Depending on which authorization mode you choose, go to the following sub-
11.
sections in this procedure:
Enabling AAA Services with the Internal Web Server
"flashed" into the system's memory and the subscriber's login page is served
directly from the HSG. In this mode, the login page consists of a simple
request for the subscriber's ID (user name) and password.
Enabling AAA Services with an External Web Server
mode, the HSG redirects the subscriber's login request to an external server
(transparent to the subscriber). The login page served by the EWS reflects
the "look and feel" of the solution provider's network and presents more
login options.
62
Print Billing Command
AAA Passthrough Port
802.1x Authentication Support
Origin Server (OS) parameter encoding for Portal Page
H
S
OT
POT
, as required. If this feature is enabled,
feature, as required.
feature, as required.
– The IWS is
– In the EWS
System Administration
G
™
ATEWAY
Advertisement
Table of Contents
