Remote Control Screen; Recording Settings; Record Screen; Figure 42 ─ Remote Control Setup Screen - PACOM 4-channel digital video recorder User Manual

User's Manual

Remote Control Screen

Highlight Remote Control in the Devices menu and press the
allows you to select a port and make correct settings for a remote keyboard.
Highlight the box beside Port and select between None, RS232 and RS485. If the RS232 port and RS485
port is in use for PTZ control, networking or text input, the remote keyboard cannot be configured.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop Bits for the device you are
connecting to the DVR.
Highlight the box beside Remote Control Product and select the device from the list.
You can save your Remote Control settings by highlighting Save and pressing the
Cancel exits the screen without saving the changes.

Recording Settings

Your DVR offers a variety of flexible recording modes. You can set it up to record all the
time or to only record events. It can be set up to continue recording once the hard disk drive
is full by recording over the oldest video, or you can set it up to alert you when the hard
disk is full and stop recording.
Figure 43 ─ Record menu.

Record Screen

Highlight Record in the Record menu and press the
30
Figure 42 ─ Remote Control setup screen.
button. The Remote Control setup screen
button. The Record setup screen appears.
button. Selecting