The VNR 100 recorder is fully compatible with existing VNM Matrix products, including the:
•
•
•
•
•
VNR 100 Drives
The VNR 100 has two replaceable drives:
•
•
Both these drives can be replaced easily. Replacing the media drive does not require any
device specific data to be updated on the OS drive. For complete instructions on replacing
the drives, see
(page 18).
Application Diagram
Browser Based User
Control
VNM Enterprise Controller
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
LAN-1
LAN-2
STATUS
VN-MATRIX 225 SERIES
Multiple VNM 200 and 225 Series Encoders
(or CODECs configured as encoders)
Figure 1.
Example of a System using the Extron VNR 100
Extron 5-channel VN-Matrix recorder
Extron VN-Matrix 2
and 3
xx
Extron VN-Matrix software decoder
Extron VN-Matrix Enterprise Controller
Extron VNS 104 Multi-Stream decoding software
Operating system (OS) drive — the OS drive contains the VNR 100 operating
system.
Media drive — the media drive contains the video, audio, data, and whiteboard
information files that have been recorded by the VNR 100.
OS Drive Replacement Kit
TouchLink
External User Control
Network
Multicast Enabled
RGB/DVI OVER IP
RGB/DVI OVER IP
RGB/DVI OVER IP
codecs
xx
(page 15) and
™
Touchpanel
VN-Matrix
VNR 100
Recorder
VN-Matrix
VNR 100
Recorder
Network
LAN-1
LAN-2
STATUS
LAN-1
LAN-2
STATUS
LAN-1
LAN-2
STATUS
Multiple VNM 200 and 225 Series Decoders
(or CODECs configured as decoders)
Media Drive Replacement Kit
VNR 100 Recorder
VNR 100 Recorder
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
VN-MATRIX 225 SERIES
RGB/DVI OVER IP
VNR 100 • Introduction
2