Setting Up The Remote Supervisor Adapter Ii-Exa - IBM eServer 445 xSeries Hardware Maintenance Manual And Troubleshooting Manual

External power
connector
Figure 14. Remote Supervisor Adapter II-EXA connectors and LEDs
External power
connector
Figure 15. Remote Supervisor Adapter connectors and LEDs
After identifying the adapter, see "Setting up the Remote Supervisor Adapter II-EXA"
or "Setting up the Remote Supervisor Adapter" on page 44.

Setting up the Remote Supervisor Adapter II-EXA

This section describes features, setup requirements, and how to cable and
configure the Remote Supervisor Adapter II-EXA for use on an Advanced System
Management (ASM) network so that you can manage the server from a remote
location.
For more detailed information, see the Remote Supervisor Adapter II User's Guide
on the IBM xSeries Documentation CD.
Remote Supervisor Adapter II-EXA features
The Remote Supervisor Adapter II-EXA provides the following:
v Seamless remote accelerated graphics
v Enhanced security features
v Continuous health monitoring and control
v Advanced Predictive Failure Analysis
v Automated Server Restart (ASR)
v Automatic notification and alerts
v Event logs that are time stamped, saved on the Remote Supervisor Adapter
v Server console redirection
v LAN and Advanced System Management (ASM) interconnect remote access
Heartbeat LED
(amber)
Power LED
(green)
Error LED
ASM interconnect
(amber)
port
Power LED
(green)
II-EXA, and can be attached to e-mail alerts
Ethernet activity LED
(green)
RSA II - EXA
breakout port
Video port
Ethernet activity LED
(green)
Management port
®
(PFA) support
Ethernet link LED
(green)
10/100
Ethernet port
Ethernet link LED
(green)
10/100
Ethernet port
Chapter 2. Configuration
33