Table of Contents
Advertisement
Figure 103. Installing the battery
10. Turn on the server.
11. Start the Configuration/Setup Utility program and set configuration parameters.
156
xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide
7. Reverse the preceding steps to reinstall the components that were removed to
access the battery.
8. Close the server cover, and connect the cables.
9. Slide the server into the rack enclosure until it stops; then, secure the server in
the rack enclosure using the quick release latches.
v Set the system date and time.
v Set the power-on password.
v Reconfigure the server.
Advertisement
Table of Contents
Troubleshooting
