Setting Up A Remote Supervisor Adapter Ii Slimline; Requirements; Cabling The Remote Supervisor Adapter Ii Slimline - IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

6. Press C to create the disk array.
7. Select Apply changes and exit menu to create the array.

Setting up a Remote Supervisor Adapter II SlimLine

This section describes how to set up, cable, and configure a Remote Supervisor
Adapter II SlimLine for use on an Advanced System Management (ASM) network
so that you can manage the server remotely.
In addition to the information in this section, see the documentation that comes with
the Remote Supervisor Adapter II SlimLine for information about how to configure
and use an ASM network to manage the server remotely through the Web-based
interface or the text-based interface.
Note: The Web-based interface and text-based interface do not support
double-byte character set (DBCS) languages.

Requirements

Make sure that you have completed the following procedures before you set up the
Remote Supervisor Adapter II SlimLine:
v Install the operating system, using the ServerGuide program and the
v If you plan to use the remote disk function, install the following software:
v Make sure that the server has an Internet connection, so that you can download
v If you plan to configure Simple Network Management Protocol (SNMP) trap alerts
v If you plan to use the Web-based interface to access the Remote Supervisor

Cabling the Remote Supervisor Adapter II SlimLine

You can manage the server remotely through the Remote Supervisor Adapter II
SlimLine by using one of the user interfaces and one of the connection methods
that are described in the following table.
documentation that comes with the operating system.
– On the server, install Microsoft Windows 2000 with Service Pack 3 or later.
– On the client system, install Microsoft Windows 2000 or later and the Java 1.4
or later Plug-in.
software and firmware from the IBM support Web site during the installation
process.
on the Remote Supervisor Adapter II SlimLine, install and compile the
management information base (MIB) on the SNMP manager. The Remote
Supervisor Adapter II SlimLine firmware, the integrated service processor
firmware, and the MIB are available on the ServerGuide Setup and Installation
CD and are fully functional. You can download the latest versions from
http://www.ibm.com/systems/support/.
Adapter II SlimLine remotely, install the Java 1.4 or later Plug-in and one of the
following Web browsers on the client system:
– Microsoft Internet Explorer version 5.5 with the latest Service Pack
– Netscape Navigator version 7.0 or later
– Mozilla version 1.3 or later
The Web browser must be Java-enabled and must support JavaScript
™
.
Chapter 3. Configuring the server
71