IBM eServer 445 xSeries Hardware Maintenance Manual And Troubleshooting Manual page 178

Figure 109. Remote Supervisor Adapter II-EXA model
Figure 110. Remote Supervisor Adapter model
5. To replace the I/O board, reverse the previous steps.
168
xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide
Remote Supervisor
Adapter II-EXA
I/O Board
1) On models with the Remote Supervisor Adapter II-EXA, use a nut driver
to remove the video port screws.
Remote Supervisor Adapter
(system management
board)
I/O Board
2) On models with the Remote Supervisor Adapter, use a nut driver to
remove the serial port screws.
f. Pull the system management board and the riser card out of the I/O board,
disconnecting any cables, and set them in a safe place.
Riser
Card
Screws from
video Port
SCSI Cable
Riser
Card
Screws from
Serial Port
SCSI Cable