IBM eServer 445 xSeries Hardware Maintenance Manual And Troubleshooting Manual page 237

Type 8870
Hide thumbs Also See for eServer 445 xSeries:
Table of Contents

Advertisement

Note: See Chapter 8, "Parts listing, Type 8870," on page 249 to determine which components are replaceable
by the customer, and which components should be replaced by an IBM field service technician.
Error code/symptom
00019702 (Processor 2 failed BIST)
00019703 (Processor 3 failed BIST)
00019704 (Processor 4 failed BIST)
00180100 (A PCI adapter has requested
memory resources that are not available)
00180200 (No more I/O space available for
PCI adapter)
00180300 (No more memory (above 1MB for
PCI adapter))
00180400 (No more memory (below 1MB for
PCI adapter))
00180500 (PCI option ROM checksum error)
00180600 (PCI built-in self test failure)
00180700, 00180800 (General PCI error)
00181000 (PCI error)
FRU/action
1. Microprocessor 2
2. VRM2
3. SMP board
1. Microprocessor 3
2. VRM3
3. SMP board
1. Microprocessor 4
2. VRM4
3. SMP board
1. Reorder the adapters in the PCI slots. It is important that
your boot device is positioned early in the scan order so that
it is executed by POST.
2. Ensure that the PCI adapter and all other adapters are set
correctly in the Configuration/Setup Utility program. If the memory
resource settings are not correct, change the settings.
3. If all memory resources are being used, you might need to
remove an adapter to make memory available to the PCI adapter.
Disabling the adapter BIOS on the adapter should correct the
error. Refer to documentation provided with the adapter.
1. Run Configuration/Setup.
2. Failing adapter.
3. PCI-X board.
1. Run Configuration/Setup.
2. Failing adapter.
3. PCI-X board.
1. Run Configuration/Setup.
2. Move the failing adapter to slot 1 or 2.
3. Failing adapter.
4. PCI-X board.
1. Remove failing PCI card.
2. PCI-X board.
1. Run Configuration/Setup.
2. Move the failing adapter to slot 1 or 2.
3. Failing adapter.
4. PCI-X board.
1. Verify that no devices have been disabled in CMOS.
2. PCI-X board
3. PCI card
1. Remove adapters in PCI slots.
2. PCI-X board.
Chapter 7. Symptom-to-FRU index
227

Advertisement

Table of Contents
loading

Table of Contents