Table of Contents
Advertisement
2. Pull out on the quick release latches on each side of the server; then, pull the
3. Remove the fan from the server:
Figure 73. Fans
4. Orient the new fan so that the latch release on the top of the fan is to the right
5. With the handle raised, push the replacement fan assembly into the server until
6. Push the handle down until it clicks into place under the latch release.
7. If you have other options to install or remove, do so now.
8. Slide the server into the rack enclosure until it stops; then, secure the server in
124
xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide
server out of its rack enclosure until it stops.
a. Press the latch release to the right and let the handle come up.
Note: The illustrations in this document might differ slightly from your
hardware.
Fan 4
Fan 3
b. Grasp the handle and lift the fan out of the server.
side of the server.
it clicks into place.
the rack enclosure using the quick release latches.
Latch release
Fan 1
Fan 2
Advertisement
Table of Contents
Troubleshooting
