Serial port
Serial connector
Figure 40. Insert the serial port into PCI-X slot 1
6. Insert the serial port into the opening.
7. Close the tab; then, push down on the orange adapter retention latch until it
clicks into place.
Serial connector
Figure 41. Route the serial port ribbon cable through the slot
8. Route the ribbon cable through the lower slot in the center of the server.
9. Connect the serial port's ribbon cable to the connector on the center plane.
10. If you have other options to install or remove, do so now.
11. Close the top cover.
Tab
Adapter
retention
latch
Chapter 4. Installing options
93