Dw-310/Dw-310P's Advanced Function; Call Pickup; Join Call; Redial / Unredial - Denwa Communications DW-310P User Manual

4
DW-310/ DW-310P's advanced function
4.1

Call pickup

Call pickup is implemented by simulating pickup function of PBX. it's that,
when A calls B, B rings but no answer, at this moment, C can hook off and
input an appointed prefix plus B's number, pick up A's call and talk with A.
The following chart shows how to configure an appointed prefix in dial peer
to have call pick up function.
*1* means appointed prefix code. After making the above configuration, C
can dial *1* plus B's phone number to pick up A's call. User can set prefix in
random, in the case of no affecting current dialing rules.
4.2

Join call

When B is calling C, A can join in the existing call by inputting an appointed
prefix numbers plus B or C number, if B or C also supports join call.
The following chart shows how to configure an appointed prefix in dial peer
to have join call function.
*2* means appointed prefix code. After making the above configuration, A can
dial *2* plus B or C number to join B and C's call. User can set prefix in
random, in the case of no affecting current dialing rules.
4.3

Redial / Unredial

If B is in busy line when A calls B, A will get notice: busy, please hang up. If A
want to connect B as soon as B is in idle, he can use redial function at the
moment and he can dials an appointed prefix number plus B's number to
realize redial function.
What is redial function? A can't not build a call with B when B is in busy, then
A will subscribe B's calling mode at 60 second intervals. Once B is available, A
will get reminder of rings to hook off, while a hooks off, A will call B
automatically. If at this time A is occupied temporarily and unwilling to