Setting By Country (Function Code 74) - Brother MFC-9320CW Service Manual

1.4.23 Setting by country (Function code 74)

<Function>
This function allows you to customize the EEPROM according to language, function settings,
and worker switch settings.
Note:
If you replace the main PCB, be sure to carry out this procedure.
<Operating procedure>
(1) Press the 7 and 4 buttons in this order in the initial state of the maintenance mode.
The present customizing code is displayed.
(2) Enter the desired customizing code (e.g., MFC-9320CW (USA): 0201). The newly
entered code appears.
To enter letters "A" through "F", press the 1 through 6 buttons while holding down the #
button respectively.
Note:
The machine does not work properly when an incorrect code is entered.
(3) Press the OK button.
The machine saves the setting and displays the "PARAMETER INIT" on the LCD.
The machine beeps for one second and returns to the initial state of the maintenance
mode.
Memo:
When the Stop/Exit button is pressed, or when no button is pressed for one second
procedure during the above procedure, the machine cancels the above, beeps for one
second and returns to the initial state of the maintenance mode.
In this case, the modified setting data is not saved.
7-43
Confidential