8.80 LV Fan ASSY
(1) Remove the two Taptite bind B M4x12 screws, and then remove the NCU harness holder
from the Side frame R.
Side frame R
(2) Remove the Taptite bind B M4x12 screw from the Safety louver.
(3) Release the two Hooks to remove the Safety louver from the Side frame R.
Note:
Do not pull the Safety louver strongly because it has the Power supply switch on it.
Fig. 5-227
Side frame R
Fig. 5-228
5-175
NCU harness holder
Taptite bind B M4x12
Taptite bind B M4x12
<Right side>
Hook
Safety louver
Hook
Power supply switch
Taptite bind B M4x12
<Right side>
Confidential