Tc Arm Spring - Brother MFC-9320CW Service Manual

8.42 TC Arm Spring

(1) Disconnect the FFC harness:MAIN-LED CTL (CN24) from the Main PCB ASSY
Note:
- After disconnecting the flat cable(s), check that each cable is not damaged at its end
or short-circuited.
- When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
(2) Release the Hook to remove the LED power relay PCB ASSY from the Side frame L.
Top cover unit
LED power relay PCB
ASSY
Side frame L
<Left side>
Main PCB ASSY
CN24
CN18
CN20
CN17
CN27
CN26
CN19
CN23 CN22
Fig. 5-107
Fig. 5-108
CN16 CN14 CN13 CN11 CN8
CN15
CN10
Hook
5-102
.
CN6
CN1
CN2
CN3
CN5
Confidential