Initializing The Eeprom Of The Main Pcb Assy (Function Code: 01); Setting By Country (Function Code: 74); Installing Language Firmware (Except For Chinese Model) - Brother DCP-1510 Service Manual

1.2

Initializing the EEPROM of the Main PCB ASSY (function code: 01)

Initialize the EEPROM of the main PCB ASSY as described in
4.
1.3

Setting by Country (function code: 74)

Perform settings for a country as described in
1.4

Installing Language Firmware (except for Chinese model)

This procedure is not required for Chinese model.
(1) Check that the machine is in the maintenance mode, and connect the computer to the
machine with the USB cable.
(2) Open the temporary folder and double-click "FILEDG32.EXE" to start it, and select the
"Brother Maintenance USB Printer".
(3) Drag and drop the required language program file (ex: LZXXXX_$.djf) in the same folder
onto the "Brother Maintenance USB Printer" icon. The file is loaded to the machine, and
installing to the flash ROM starts.
(4) When installing is completed, the machine restarts and returns to the ready state. Do not
disconnect the USB cable or turn OFF the power switch of the computer until installing is
completed.
(5) Turn the machine OFF and disconnect the USB cable.
"Function code: 01" in Chapter
"Function code: 74" in Chapter 4.
3-3
Confidential